But if you're too worried about applying using that method, then the bundled stencil and spreader make it very easy to get things done. The XTM50 paste by itself has low viscosity, so can also just use the 'Dot method' to apply the paste and let the mounting pressure do its thing.
The Thermal Grizzly Hydronaut has a viscosity of 140-190 pas, which means it's more of a paste than a liquid. The company says Hydonaut has a thermal conductivity of 0.0076 K/W and doesn't conduct electricity. The company has a bunch of different thermal pastes in its product stack, but we think this is one that most people should be looking at, as it offers what we think is the best price-to-performance ratio. Thermal Grizzly says its Hydronaut paste is suitable for most PCs, including overclocked ones. The company calls it thermal grease, but that's just another name for these thermal solutions. We've picked Thermal Grizzly's Hydronaut thermal paste. Thermal Grizzly is known to have some of the best thermal solutions on the market, although your mileage may vary. It's a well-known brand that specializes in thermal solutions, and they have a bunch of different options ranging from thermal grease, thermal pads, liquid metal, and more. It's difficult to ignore the thermal solutions from the house of Thermal Grizzly while discussing thermal paste. This means you can use this paste while using sub-zero cooling methods to achieve extremely high overclocking speeds. The Noctua NT-H1 is also one of the few thermal paste solutions on the market that's also suitable for compressor cooling.
The Noctua NT-H1 is also not electrically conductive, meaning there's no danger of short circuits from the paste making contact with the motherboard PCB or any other components that are installed on the board.
#Best liquid metal thermal paste install
The Noctua NT-H1 doesn't have a break-in period which means it's good to go right from the moment you install the CPU cooler and boot the system. It offers an impressive set of features that many other thermal paste solutions on the market lack. The Noctua NT-H1 is known to be one of the best thermal pastes on the market, and it's our second-best pick for the best thermal paste you can buy right now. Many of these coolers come with the company's NT-H1 thermal paste, a brown-colored tube. That's why we've added Noctua CPU coolers to the list of the best CPU coolers on the market.
Noctua caters to a very specific set of users who demand high-performance cooling while keeping the noise output to the lowest possible. It is also durable for 5 years, which is higher than a lot of other options on the market. While the Arctic MX-6 may not be one of the more affordable options on the market (most thermal solutions won't require shelling out a lot of money), but the price per gram is quite competitive in the Arctic's case. In fact, the same paste can also be applied to GPUs as well. You can use it on both mainstream and HEDT CPUs too. The Arctic thermal paste can be used with any and all kinds of processors and is not limited to any particular CPU. You may find other thermal solutions on the market with a higher thermal conductivity of, say, around 14W/mk. The thermal conductivity is obviously a lot lower than that of the metals like aluminum or copper, as it should be. The Arctic MX-6 has a viscosity of 45,000 poise. Remember, we're merely trying to fill the gaps between the CPU IHS and the CPU cooler's contact plate. It's important to maintain the right amount of paste since you don't want to have too much paste on the IHS as it may result in less thermal resistance. The best thing about MX-6 is that it's easy to apply the paste on the CPU IHS.
0 kommentar(er)
